KYUNGJIN IRE, Official Husqvarna Distributor in Korea · Consultation 1577-6310

Chainsaw Will Not Start? Check in This Order

Last updated · Husqvarna Korea

Many starting problems are fuel-related. This guide lists checks you can perform before taking the machine to a service center.

1. Start with the Fuel

Discard fuel mix that is more than one month old and prepare a fresh batch. The mixing ratio is 50:1 when using Husqvarna 2-stroke oil. If straight gasoline without oil was added, do not start the engine; contact a service center immediately.

2. Switch and Choke

Check that the stop switch is in the ON position. For a cold engine, engage the choke and pull the starter; after the first firing sound, disengage the choke and pull again. The sequence varies slightly by model, so follow the starting procedure in the operator's manual.

3. If the Engine Is Flooded

Pulling the starter repeatedly with the choke engaged can flood the engine and wet the spark plug. Remove and dry the plug, or restart using the flooding-clearance procedure in the operator's manual.

4. Air filter

If sawdust clogs the filter, both starting and power will suffer. Tap it clean or wash it, and replace it if torn.

5. Spark plug

If the electrode is wet, blackened, or worn, replace the spark plug. Use a genuine plug suitable for the model.

6. If the problem persists, contact a service center

The fuel filter, carburetor adjustment, and compression require professional inspection. Tell the Head-office service center (1577-6310, extension 2) or a nearby Authorized Service Center the model and symptoms.

For questions about product selection or after-sales service, call Customer Service at 1577-6310, extension 1. Support · Product Instructions · Safety & Certification

Other articles

Phone ConsultationSend Us an Inquiry