Before gravesite maintenance and seasonal ancestral rites, inspect these brushcutter items first
For a brushcutter stored for nearly 1 year, begin by checking the fuel and blade. This guide covers a pre-start inspection that takes 10 minutes.
Discard last year's fuel and mix fresh fuel
Stored fuel mix changes over time and is a common cause of starting problems. Discard fuel kept for more than one month and freshly mix gasoline and Husqvarna 2-stroke oil at 50:1 (20mL oil per 1L gasoline). For other oils, follow the ratio shown on the container.
Check the blade and guard
Replace a metal blade immediately if it is cracked or has missing teeth. Check that the blade retaining nut is properly tightened and that the correct guard for the blade type is installed. If you use nylon line, make sure enough line remains.
Air filter and spark plug
If dust has accumulated in the air filter, shake it out or clean it. Replace the spark plug if the electrode is blackened or worn. Search by model name for consumables at the official store or an Authorized Husqvarna Dealer.
Adjust the harness and handles to fit your body
Adjust the harness so the blade is parallel to the ground and below waist height to reduce fatigue during extended work. On backpack models, tighten both shoulder straps evenly so the entire back supports the weight.
Put on protective equipment
Safety glasses or a mesh face shield, hearing protection, gloves, and slip-resistant work boots covering the ankles are essential. Metal blades can throw stones and wood fragments a long distance, so keep bystanders away while working.
If it will not start
If the engine still will not start after checking the fuel, switch, choke, filter, and plug, do not keep pulling forcibly. Take it to the Head-office service center (1577-6310, extension 2) or a nearby Authorized Service Center.
For questions about product selection or after-sales service, call Customer Service at 1577-6310, extension 1. Support · Product Instructions · Safety & Certification