KYUNGJIN IRE, Official Husqvarna Distributor in Korea · Consultation 1577-6310

How to Mix 2-Stroke Oil Correctly at 50:1

Last updated · Husqvarna Korea

The fuel-mixing ratio directly affects engine life. This guide explains how to achieve the exact 50:1 ratio with Husqvarna 2-stroke oil and avoid common mistakes.

The standard ratio is 50:1: 20mL of oil per 1L of gasoline

For 2-stroke engines such as Husqvarna chainsaws, brushcutters, and leaf blowers, mix gasoline at 50:1 when using Husqvarna 2-stroke oil. Use 20mL per 1L of gasoline, 100mL per 5L, or 200mL per 10L. Oils from other manufacturers may specify a different ratio, so follow the label on the container.

Too little oil, too much oil

Too little oil can cause friction, scoring, and seizure inside the engine. Too much oil produces excessive smoke and deposits on the spark plug and exhaust port. Measure the oil instead of estimating it.

Mixing order

Fill a clean fuel container about halfway with gasoline, add all the oil, then add the remaining gasoline and shake to mix. Shake it once more before pouring it into the equipment's tank.

Mix only as much as you will use within one month

Mixed fuel deteriorates over time and can cause starting problems. Mix only what you will use within one month and discard old fuel mix.

Do not confuse it with chain oil

The 2-stroke engine oil mixed with fuel and the chain oil used on a chainsaw's bar and chain are completely different products. Put chain oil in the separate chain-oil tank.

For questions about product selection or after-sales service, call Customer Service at 1577-6310, extension 1. Support · Product Instructions · Safety & Certification

Other articles

Phone ConsultationSend Us an Inquiry