KYUNGJIN IRE, Official Husqvarna Distributor in Korea · Consultation 1577-6310

How to Choose a Chain File and Gauge

Last updated · Husqvarna Korea

Each chain requires a specific file diameter. This guide explains how to choose a file by your chainsaw's chain number and how to sharpen the chain.

First, check the chain number

Husqvarna chains are identified by chain-type numbers such as S93G, SP33G, S35G, and C85. Find the number under “Chain type” in the specifications table on the product page or on the chain packaging. Select a file that matches this number.

File diameter by pitch

Under Husqvarna guidelines, use a 4.0mm round file for a 3/8" mini (low-profile) chain, a 4.8mm round file for a .325" chain, and a 5.5mm round file for a 3/8" chain. A file with the wrong diameter will distort the cutter profile and reduce cutting performance.

Why a file kit is convenient

A Husqvarna file kit includes a round file, flat file, depth gauge, and filing guide for maintaining the correct angle. Kits are available by chain number (such as S93G, SP33G, and C85), making it easier for first-time users to maintain the correct angle.

Adjust the depth gauge as well

After the cutters have been sharpened several times, the depth gauge (raker) ahead of each cutter becomes relatively high, so the chain bites less deeply into the wood. Place a depth-gauge tool over the chain and file only the protruding portion with a flat file. Removing too much increases the risk of kickback.

Sharpening technique

Engage the chain brake and secure the bar. Apply pressure only on the forward stroke and file every cutter the same number of times. Filing one side more than the other will make the saw pull to one side. If the cutters are heavily worn or broken, replacing the chain is preferable.

For questions about product selection or after-sales service, call Customer Service at 1577-6310, extension 1. Support · Product Instructions · Safety & Certification

Other articles

Phone ConsultationSend Us an Inquiry