KYUNGJIN IRE, Official Husqvarna Distributor in Korea · Consultation 1577-6310

Parts purchasing guide

Check the model name of the product in use and the part information you need. After compatibility and availability are confirmed, we will explain how to purchase it.

For accurate part identification, provide both the product model name and part number.

Find parts by model name

  1. Check the model name

    Check the model name (for example, 550XP Mark II, 450S, or 525RS) and serial number on the machine label, usually near the starter or underneath on a chainsaw.

  2. List the parts you need

    State whether you need a consumable such as an air filter, spark plug, or starter rope, or a broken part. A photo helps us identify it faster.

  3. Contact Customer Service

    For parts inquiries, contact Customer Service (1577-6310, ext. 1).

How to Read Guide Bar·Saw Chain Specifications

The saw chain must match the guide bar specifications. Check the three numbers stamped near the rear of the guide bar, on the engine side.

ItemMeaningYes
PitchThe distance between chain rivets. It must also match the sprocket..325" · 3/8"
GaugeDrive-link thickness. It must match the width of the bar groove..050" (1.3mm) · .058" (1.5mm)
Number of drive linksThe number of drive links on the inside of the chain. It varies with bar length.64 · 72 · 84
Bar lengthThe effective length of the bar extending beyond the body.38cm(15") · 45cm(18")

If any one of the three numbers differs, the chain may not fit or may wear out quickly. If unsure, photograph the markings engraved on the bar and send the image.

Husqvarna Genuine Consumables List

Frequently purchased equipment and fuel / oil items such as guide bars·saw chains·files·oil·brushcutter blades are organized by category.

Non-genuine chains or bars, or parts that do not meet specifications, can increase the risk of kickback and damage the engine. We recommend genuine parts.

Frequently Asked Questions

Can I still obtain parts for discontinued Husqvarna models?

KYUNGJIN IRE Co., Ltd. systematically manages parts through its Cheonan distribution center to support ongoing product maintenance. Provide the product model and required part name (part number), and we will check inventory and supply availability.

Where can I buy guide bars and saw chains?

Purchase from the Husqvarna online store (husqvarna.co.kr) or an Authorized Husqvarna Dealer in Korea. Before buying, check the pitch·gauge·number of drive links stamped on your current bar.

How do I identify chainsaw chain specifications?

Check the numbers stamped on the back of the guide bar. The pitch (.325" or 3/8"), gauge (.050"=1.3mm, .058"=1.5mm), and number of drive links (e.g., 72) must all match.

Phone ConsultationSend Us an Inquiry